Kilsaran NSG 2601 is, a non-shrink construction grout, designed for use in thicknesses ranging from 10mm – 100mm.
Kilsaran NSG 2601 is, a non-shrink construction grout,
designed for use in thicknesses ranging from 10mm –
100mm, in the following applications;
• Stanchion baseplates
• Bedding precast units
• Machine & Plant baseplates
• Jointing precast concrete panels
• Grouting bearing plinths
• Duct Filling
Suitable for use in temperatures between +5°C and +30°C.
Ensure all surfaces are clean and free from dust, dirt and
grease. Pre-soak area to be grouted a minimum of 4 hours
prior to installation. Remove any ponded water. Mix using a
suitable paddle mixer or pump mixer. To create a highly
flowable grout, mix the contents of a 25kg bag with 5 litres
of water for 2-3 minutes. Less water can be added to create
a plastic or stiff mix for plinths and bedding precast
Baseplate: Ensure that a sufficient supply of material will be mixed in
order to avoid interruption when filling. Always pour from one side
and use air vents where necessary to avoid air entrapment. Pour from
a height to ensure maximum compaction and use a rod to aid filling.
Do not vibrate the grout. Temporary levelling shims should be greased
if they are to be removed after grout hardenes.
Formwork: As the grout is free flowing it is important to ensure the
formwork is sufficiently prepared to avoid leaks. A sacraficial concrete
mix can be used to fix the baseplate shutter or as a bern. Keep
unrestrained areas around the baseplate to less than 150mm.
Curing: Should be as per standard practices for cement based
products. Grout should be protected from strong sunlight and cold
This product offers many advantages over conventional site-mixed or
• Non Shrink formula • High early and ultimate strength
• Can be pumped or poured • High workability with no segregation
• Long term durability • Convenient and user-friendly
• Eliminates wastage • Chloride free