Kilsaran KPRO Repair CRM-203 is a fine concrete mix specifically formulated for a wide range of pavement repair applications between 30mm and 150mm in depth. Greater depths are possible using a layer on layer method. Get Technical Documents
Product Application Kilsaran KPRO FaçadeRC is suitable for use externally as a final harling coat, applied over a suitable undercoat, such as KPRO Façade GP and a coloured butter/dash receiver coat, such as KPRO Façade DR Product Use KPRO RC is suitable for hand application, by means of throwing/harling. For mixing and applying info see […] Get Technical Documents
Kilsaran KPRO Floor FLS-410 are semi dry levelling fibre reinforced screeds for use in domestic, commercial and industrial applications.
They are suitable for use in bonded, un-bonded and floating screed constructions. Get Technical Documents
Kilsaran KPRO CRM 201 is a General Purpose Concrete Reinstatement Mortar suitable for internal and external use, vertical, horizontal, and overhead concrete surfaces. Get Technical Documents
Kilsaran KPRO Floor FLS-401 are semi dry levelling fibre reinforced screeds for use in domestic, commercial and industrial applications. Get Technical Documents
Kilsaran KPRO Floor FLS-401 are semi dry levelling fibre reinforced screeds for use in domestic, commercial and industrial applications. Get Technical Documents
Kilsaran KPRO Repair CSM-120 is a rapid setting mortar mix specifically formulated for a wide range of resurfacing applications. Get Technical Documents
Kilsaran KPRO Repair CSM-101 is a Concrete Surfacing Mortar specifically formulated for a fairing coat on vertical or overhead soffit concrete elements. Get Technical Documents
Kilsaran KPRO Repair CSM-100 is a rapid setting mortar mix specifically formulated for a wide range of resurfacing applications. Get Technical Documents
Kilsaran Uno One Coat Renders are colored decorative rendering mortars designed for single coat application to most common brick work and block work backgrounds. Get Technical Documents
Kilsaran KPRO Crete Post 10 is a rapid setting, fine concrete mix designed for the rapid installation and anchoring of all types of timber, plastic, metal and concrete posts. Get Technical Documents
Kilsaran KPRO Crete Multi-Purpose Concrete is a fine concrete mix suitable for use in all general concrete work, both internally and externally. Get Technical Documents
Kilsaran KPRO Crete Rapid Setting Concrete is a fine concrete mix suitable for use in all general concrete work, both internally and externally where rapid setting and rapid strength development are required. Get Technical Documents
Kilsaran KPRO Street HSBC (High Strength Bedding Concrete) is a polymer modified fine concrete, designed for the bedding of pavements constructed with natural stone, granite setts, concrete flags and paving bricks.
Product Application
Kilsaran HSBC (High Strength Bedding Concrete) is a
polymer modified fine concrete, designed for the bedding of
pavements constructed with natural stone, granite setts,
concrete flags and paving bricks. The product is formulated
to meet the requirements of BS 7533 parts 7 & 12. Kilsaran
HSBC can be used in the following applications;
• Bedding of concrete flags, paving bricks, natural stone
and granite setts
• Haunching of kerbs and kerb setts
• Where the application requires a high strength
construction
Product Use
Suitable for use in temperatures between +5°C and +30°C.
Ensure the supporting base is stable, sound and free from
any dust, dirt or grease. The supporting base should then be
pre-soaked and have all ponded water removed prior to
application.
Kilsaran HSBC should be mixed with 2.3-2.5 litres of clean
potable water per 25kg bag of material to reach the desired
moist consistency, suitable for bedding (as outlined in BS
7533). Material mixed from our bulk silos should be done so
in accordance with the site training given by our technical
team.
The fresh bedding concrete should be laid in depths of
10mm-75mm, onto the freshly primed base. Once the fresh
HSBC has been placed and spread to the desired
consistency, the pre-soaked and primed paving unit should
be immediately bedded into position. In all instances this
product should be used in strict accordance with BS 7533.
Benefits
This product offers many advantages over conventional site-mixed or
ready-mixed rendering mortars:
• Eliminates inaccurate site mixing
• Complies with BS 7533
• Long term durability
• Convenient and user-friendly
• Eliminates wastage Get Technical Documents
Kilsaran KPRO Street Priming Slurry is a polymer modified cementitious slurry, designed to give exceptional bond between bases, all types of paving units and their bedding material. The product is formulated for use in conjunction with Kilsaran HSBC to provide an adhesion strength of greater than 2 N/mm², as per
the requirements of BS 7533.
Product Application
Kilsaran Priming Slurry is a polymer modified cementitious
slurry, designed to give exceptional bond between bases, all
types of paving units and their bedding material. The product
is formulated for use in conjunction with Kilsaran HSBC to
provide an adhesion strength of greater than 2 N/mm², as per
the requirements of BS 7533.
Product Use
Suitable for use in temperatures between +5°C and +30°C.
Ensure the supporting base is stable, sound and free from
any dust, dirt or grease. Once clean the base should be presoaked
and have all ponded water removed prior to
application of the priming slurry.
Kilsaran Priming Slurry should be mixed with 5.0-5.4 litres of
clean potable water per 20kg bag of material for 3-4 minutes
to reach the desired consistency, suitable for priming.
Once mixed apply a 1mm-2mm coat of priming slurry to the
pre-soaked base. Following installation of the bedding
material, such as Kilsaran HSBC, all paving units should be
pre-soaked and then have their bedding face coated with a
1mm-2mm coat of the priming slurry and then placed into
position.
Benefits
This product offers many advantages over conventional sitemixed
or ready-mixed rendering mortars:
• Eliminates inaccurate site mixing
• Complies with BS 7533
• Improves adhesive strength of paving
• Convenient and user-friendly
• Eliminates wastage Get Technical Documents
Kilsaran KPRO Street Rapid Set Jointing Mortar is designed for the jointing of pavements units constructed with clay, natural stone,
granite setts, concrete flags and paving bricks. The product is formulated to meet the requirements of BS 7533 parts 7 &
12. Kilsaran Rapid Set Jointing Mortar can be used in the
following applications;
• Jointing of natural stone setts and slabs
• Joints to kerbing
• Jointing of concrete flags
• Jointing of clay pavers
Product Use
Suitable for use in temperatures between +5°C and +30°C.
Ensure the paving is free from any dust, dirt or grease, presoaked
and having all ponded water removed prior to
application. Kilsaran Rapid Set Jointing Mortar should be
mixed with approximately 4.25 litres of clean potable water,
per 25kg bag of material, for 3 minutes to reach a lump free
flowing consistent slurry. Do not remix or add additional
water to the mix. Only mix enough material which can be
placed in within 10 minutes. Pour the fresh mortar onto the
prepared paved area and chase into all joints with a soft
brush or squeegee. Ensure joints are full, allowing for
settlement and remove any excess material with the
squeegee once joints are full. Spray a mist of water onto the
area at all times to aid the cleaning process. When the joints
are sufficiently hard (this could be as soon as 15 minutes)
remove any residual material with a constant flow of water
and a diagonal sweeping action. A specifically designed belt
cleaner can also be used. Timing and experience are critical
to ensure no staining occurs. Once cleaned inspect all areas
to ensure all excess mortar is removed.
Benefits
This product offers many advantages over conventional site-mixed or
ready-mixed rendering mortars:
• Rapid Setting – Initial set in 15 minutes
• Shrinkage compensated
• Light foot traffic in just 1 hour
• Complies with BS 7533
• Long term durability
• Convenient and user-friendly
• Eliminates wastage
• Promotes cleaner and safer sites Get Technical Documents
Kilsaran KPRO Street RRC 60 is designed for use as a reinstatement
concrete, and in particular can be used as per clause 1032
and 1106 of the NRA specification for road works (2000).
Kilsaran RRC 60 is ideal for;
• Reinstating footpaths, driveways, patios
• Surface surrounds of posts, railings and bollards
• Surface surrounds to services in footpaths, e.g. hydrants
etc.
• Reinstating surfaces, where early trafficking is required.
Product Use
Suitable for use in temperatures between +5°C and +30°C.
Ensure the area is free from any dust, dirt or grease, and predampened
prior to application. The use of a suitable primer
(such as Kilsaran Priming Slurry) is recommended for smooth
substrates prior to placing. Kilsaran RRC 60 should be mixed
with 2.75-3.15 litres of clean potable water per 25 kg bag, to
achieve a workable concrete mix. Mixing can be carried out
by a rotary or paddle mixer or by hand. Only mix enough
material that can be placed within 5 minutes. Once mixed
place the fresh material in the prepared area to a depth of
25mm-100mm. It is recommended to cut or scable existing
concrete to a depth of at least 10mm before placing RRC 60,
as feather edge finishing is not recommended. Once placed,
the reinstated area should be cured with a water based curing
membrane and protected from premature drying and cold
weather. It is recommended that the area is also cured in
accordance with clause 1027 of the NRA specification for
roadworks (2000).
Benefits
This product offers many advantages over conventional site-mixed or
ready-mixed rendering mortars:
• Rapid Setting – Final set in 15 minutes
• Shrinkage compensated
• Light foot traffic in just 1 hour
• One part component
• Long term durability
• Poly fibre modified
• Eliminates wastage
• Freeze thaw resistant Get Technical Documents