KPRO Wet Dash is a semi-finished traditional lime & aggregate mix for use in a multi-coat render
system externally, as set out in IS EN 998-1. The products requires blending with cement on the
construction site prior to application, and should be used in accordance with EN 13914 part 1
and manufacturer’s instructions. The ‘pre-soured’ wet dash product consists of clean sharp
sand, carefully graded aggregates and hydrated lime. The upper size of the aggregate is
approximately 12mm unless otherwise declared.

Applications
KPRO Façade Wet Dash is mixed to a general purpose rendering mortar designed for
application over a suitable general purpose render undercoat, which has similar or
stronger compressive strength than the Wet Dash itself.

Product Use
KPRO Façade Wet Dash is designed for hand application.
Mixing: This product should be mixed in a suitable site mixer with a CEM I or CEM II cement
and clean potable water.  Proprietary integral waterproofer/plasticisers should be used as per manufacturer’s instructions, if required. Trials to
assess suitability with the cement types is recommended